24/7 Emergency Service3 Steps After a Pipe Break
6/20/2022 (Permalink)
A pipe break can happen during any time of the year but is more likely to occur during the winter if the pipes are in an uninsulated area of your property. Be advised that bursting pipes can cause extensive water damage which is why it’s important to call a restoration company such as SERVPRO of Laguna Hills/Laguna Niguel as soon as possible. Here are the three steps to take after a pipe break.
1. Stop the Water Flow
Turn off the water immediately. After you shut off the main water supply, you need to drain the pipes. To do this, turn on the cold water on every faucet on your property and flush every toilet at least once. Then turn off the hot water heater and run the hot water on every faucet. Taking these crucial steps ensures the leak will stop. But you’re not done yet.
2. Reduce and Fix the Damage
At this point, it’s best to reach out to the professionals so they can fix the broken pipe. However, you might be able to locate the broken pipe yourself. Don’t walk in water as this increases the risk of getting electrocuted. It’s recommended that you turn off the electrical power no matter if the water is one foot or only one inch high. Furthermore, unplug appliances and turn off the furnace. If safe, you can move valuable items, electronics and fabrics to higher ground.
3. Call a Water Restoration Company
Opening the windows and running fans run won’t prevent mold growth from bursting pipes. No matter how extensive you think the damage is, contact a water restoration company as there might be damage you are not able to spot. Mold and mildew begins to grow only 24 to 48 hours after such an event. You don’t want to risk your health and more damage to your property.
When your plumbing breaks, there’s little time to spare. Take these three steps immediately to reduce the water damage in Laguna Hills/Laguna Niguel due to bursting pipes.
Call SERVPRO of Laguna Hills/Laguna Niguel at (949) 472-8090